所有的输送带必须接成环形才能使用，所以输送带接头的好坏直接影响输送带的使用寿命和输送线能否平稳顺畅地运行。一般输送带接头常用方法有机械接头、冷粘接接头、热硫化接头等。
All conveyor belts must be connected in a circular shape before they can be used, so the quality of the conveyor belt joints directly affects the service life of the conveyor belt and the smooth operation of the conveyor line. The commonly used methods for conveyor belt joints include mechanical joints, cold adhesive joints, hot vulcanization joints, etc.
输送带机械接头法：一般是指使用皮带扣接头，这种接头方法方便便捷，也比较经济，但是接头的效率低，容易损坏，对输送带产品的使用寿命有一定影响。PVC和PVG整芯阻燃抗静电输送带接头中，一般8级带以下的产品都采用这种接头方法。
Mechanical joint method for conveyor belts: generally refers to the use of belt buckle joints. This joint method is convenient, convenient, and relatively economical, but the efficiency of the joints is low, easy to damage, and has a certain impact on the service life of conveyor belt products. In PVC and PVG whole core flame-retardant and anti-static conveyor belt joints, this joint method is generally used for products below grade 8.
输送带冷粘接头法：即采用冷粘粘合剂来进行接头。这种接头办法比机械接头的效率高，也比较经济，应该能够有比较好的接头效果，但是从实践来看，由于工艺条件比较难掌握，另外粘合剂的质量对接头的影响非常大，所以不是很稳定。
Cold adhesive head method for conveyor belts: using cold adhesive to make joints. This joint method is more efficient and economical than mechanical joints, and should have a good joint effect. However, in practice, due to the difficulty in mastering the process conditions and the significant impact of adhesive quality on the joint, it is not very stable.
输送带热硫化接头法：实践证明是最理想的一种接头方法，能够保证高的接头效率，同时也非常稳定，接头寿命也很长，容易掌握。但是存在工艺麻烦、费用高、接头时间长等缺点。
Conveyor belt hot vulcanization joint method: Practice has proven to be the most ideal joint method, which can ensure high joint efficiency and is also very stable. The joint life is also very long and easy to master. However, there are drawbacks such as process complexity, high cost, and long joint time.
