输送带边缘磨损的起因与防范措施

输送带龟裂的主要原因是由于受空间尺寸的限制,输送带的弯曲次数多;接头硫化时由于种种原因进行过两次以上的硫化。导料槽衬板与胶带之间的间隙不合适,造成异常磨损,或间隙处嵌入异物,造成异常磨损或划伤。导料槽处物料流速与输送带速度不一致,落差大,加速胶面磨损。托辊损坏,造成胶带的异常磨损或划伤。胶带打滑,也会造成胶带异常磨损。
The main reason for conveyor b泥杆 保定古筝 塑料增韧剂 拱形护坡模具 保定空调维修  托辊生产线elt cracking is due to the limitation of space size, which results in more bending times of the conveyor belt; The joint has undergone more than two vulcanizations due to various reasons during vulcanization. The gap between the guide groove lining plate and the tape is not suitable, causing abnormal wear or foreign objects embedded in the gap, resulting in abnormal wear or scratches. The material flow rate at the guide chute is inconsistent with the speed of the conveyor belt, and the drop is large, which accelerates the rubber surface wear. The roller is damaged, causing abnormal wear or scratches on the tape. Slippery tape can also cause abnormal wear of the tape.
输送带边缘磨损的起因与防范措施：输送带边缘磨损主要是输送带跑偏时带边与机架的摩擦磨损。输送带应该在托辊组的中心线上运行，但由于输送机的制造、安装、使用等造成的缺陷，输送带时常会偏离中心线发生跑偏。通常，输送带在宽度方向上允许有5%的跑偏量，当跑偏过多时，输送带与托辊支架、机架接触而造成边胶磨损，严重跑偏时，甚至会使输送带翻边，如滚筒的径向游螺丝钉头，清扫器挡块等凸起部位，或机架间隙过小，易引起输送带撕裂，覆盖胶局部剥离和划伤。
The causes and preventive measures of conveyor belt edge wear: The conveyor belt edge wear mainly refers to the friction and wear between the belt edge and the frame when the conveyor belt deviates. The conveyor belt should run on the centerline of the roller group, but due to defects caused by the manufacturing, installation, and use of the conveyor, the conveyor belt often deviates from the centerline and deviates. Generally, the conveyor belt is allowed to have 5% deviation in the width direction. When the deviation is too much, the conveyor belt will contact with the carrier roller support and the rack, causing the edge rubber to be worn. When the deviation is serious, the conveyor belt will even be flanged, such as the radial travel of the roller screw head, the cleaner stop and other convex parts, or the rack gap is too small, which is easy to cause the conveyor belt to tear, the covering rubber to peel off and scratch locally.