挡边输送带为大倾角波状挡边输送带。
The edge conveyor belt is a large angle wavy edge conveyor belt.
大倾角波形挡边带由基带、挡边:基带、挡边和横隔板。挡边起到防止物料测滑散落的作用。为了方便绕过滚筒，挡边设计成波纹状；横隔板的作用是支撑物料。为了实现大倾角输送，采用T型TC型。边缘和横隔板通过二次硫化与基带连接，连接强度高。
The high angle waveform edge guard is composed of a baseband, an edge guard: the baseband, an edge guard, and a transverse partition. The edge guard plays a role in preventing material from sliding and scattering. For the convenience of bypassing the drum, the edge guard is designed to be corrugated; The function of the diaphragm is to support the material. In order to achieve high angle conveying, a T-shaped TC type is adopted. The edge and diaphragm are connected to the base band through secondary vulcanization, resulting in high connection strength.
波形挡边输送带(普通大倾角波形挡边输送带)品种:根据覆盖胶的不同性能，可分为普通型、耐热型、耐燃型、耐寒型、耐酸碱型、耐油型等。
Type of corrugated edge conveyor belt (ordinary large angle corrugated edge conveyor belt): According to the different properties of the covering adhesive, it can be divided into ordinary type, heat resistant type, flame resistant type, cold resistant type, acid and alkali resistant type, oil resistant type, etc.
波状挡边输送型槽模具 一次性止血带 保定水处理设备 一次性止血带 保定空压机 北京真空泵带(普通大倾角波状挡边输送带)规格:
Specification of corrugated edge conveyor belt (ordinary high angle corrugated edge conveyor belt):
(1)带芯材料:CC-56.NN100.NNN150.NNN200.NNN300.NN400。
(1) Core material: CC-56.NN100.NNN150-NNN200-NNN300-NN400.
(2)带宽：100mm-2400mm。
(2) Bandwidth: 100mm-2400mm.
(3)布层:2-10层。
(3) Fabric layer: 2-10 layers.
(4)工作面:1.5-8m覆盖胶。
(4) Working surface: 1.5-8m covered with adhesive.
挡边输送带的带芯材料:
Core material of edge conveyor belt:
棉帆布芯CC-56。
Cotton canvas core CC-56.
尼龙布芯NN100.NN150.NNN200.NNN300.NNN400.NNN500。
Nylon fabric core NN100-NN150-NNN200-NNN300-NNN400-NNN500.
聚酯布芯EP100.EP150.EP200.EP300.EP400.EP500.EP500。
Polyester fabric core EP100.EP150.EP200.EP300.EP400.EP500.EP500.
ST1000-ST5400。
ST1000-ST5400。
挡边高度(mm)：S80.S100.S120.S160.S200.S240.S400.S500。
Edge height (mm): S80.S100.S120.S160.S200.S240.S400.S500.
隔板高度(mm)：TC75.TC90.TC110.TC180.TC280.TC380.TC480。
Partition height (mm): TC75.TC90.TC110.TC180.TC280.TC380.TC480.
一般书写方法：如B800*6（3+3+1.5）*110米。
General writing method: such as B800 * 6 (3+3+1.5) * 110 meters.
