螺旋输送机常用的润滑方法有五种！
There are five commonly used lubrication methods for screw conveyors!
由于螺旋输送机结构简单，维护方便，应用广泛。输送机操作人员在日常工作中应注意输送设备的维护，螺旋输送机的润滑尤为重要。以下小系列介绍了螺旋输送机常用的五种润滑方法:
Due to its simple structure and convenient maintenance, screw conveyors are widely used. Conveyor operators should pay attention to the maintenance of conveying equipment in their daily work, and the lubrication of screw conveyors is particularly important. The following series introduces five commonly used lubrication methods for screw conveyors:
1.检查螺旋润滑部位的温度变化，轴系温度应型槽模具 一次性止血带 保定水处理设备 一次性止血带 保定空压机 北京真空泵保持在规定范围内；
1. Check the temperature change of the spiral lubrication part, and the temperature of the shaft system should be maintained within the specified range;
2.用加压或传动螺钉和螺母定期注油润滑，不常用的传动螺钉和螺母用油封密封；
2. Regularly lubricate transmission screws and nuts with pressure or oil, and seal infrequently used transmission screws and nuts with oil seals;
3.定期擦洗设备使用的工具，定期检查，保持完整清洁；
3. Regularly clean the tools used in the equipment, inspect them regularly, and maintain complete cleanliness;
4.自动注油润滑点应经常检查油压、油位、温度和油泵输油量，发现问题及时处理；
4. Automatic oil injection lubrication points should regularly check the oil pressure, oil level, temperature, and oil pump delivery capacity, and promptly handle any problems found;
5.润滑操作人员应按时检查，注意润滑点是否有漏油和异常变化，及时解决问题；
5. Lubrication operators should check on time, pay attention to whether there are oil leaks and abnormal changes at lubrication points, and solve problems in a timely manner;
