所有的输送带必须接成环形才能使用，所以输送带接头的好坏直接影响输送带的使用寿命和输送线能否平稳顺畅地运行。一般输送带接头常用方法有机械接头、冷粘接接头、热硫化接头等。
All conveyor belts must be connected into a ring to use, so the quality of the conveyor belt joint directly affects the service life of the conveyor belt and whether the conveyor line can run smoothly
and smoothly. The common methods of conveyor belt joints are mechanical joints, cold bonded joints, hot vulcanized joints, etc.
输送带机械接头法：一般是指使用皮带扣接头，这种接头方法方便便捷，也比较经济，但是接头的效率低，容易损坏，对输送带产品的使用寿命有一定影响。PVC和PVG整芯阻燃抗静电输送带接头中，一般8级带以下的产品都采用这种接头方法。
Conveyor belt mechanical joint method: generally refers to the use of belt buckle joint, this joint method is convenient and economical, but the efficiency of the joint is low, easy to damage, has a certain impact on the service life of conveyor belt products. In the joints of PVC and PVG integral core flame retardant and antistatic conveyor belts, the joint method is generally used for products below grade 8 belt.
输送带冷粘接头法：即采用冷粘粘合剂来进行接头。这种接头办法比机械接头的效率高，也比较经济，应该能够有比较好的接头效果，但是从定送水 保定骨伤骨病 铜鼎铜钟 淤泥固化设备 保定舞蹈 化粪池钢模具 保定网站建设实践来看，由于工艺条件比较难掌握，另外粘合剂的质量对接头的影响非常大，所以不是很稳定。
Conveyor belt cold bonding joint method: that is to use cold bonding adhesives for joints. This kind of joint method is more efficient and economical than mechanical joint. It should have better joint effect. But in practice, it is not very stable because the process conditions are difficult to master and the quality of adhesives has a great influence on the join